Forced-draft air-cooled condensers are the most effective solution for condensing still vent vapors. If designed and applied correctly they are able to achieve a 2°-4°F. approach to ambient temperature. The lower process temperature condenses more of the still vent stream which reduces the amount of non-condensable gas from the BTEX system and captures more saleable condensate. These units, while typically slightly heavier, are also more compact and easier to transport than A-frame type condensers and require only a forklift to unload and set in place.

Scorpion Forced-Draft BTEX System 6-FAC:

• Forced Draft Design Cools To 2°f. Approach To Ambient. Condenses More Valuable Hydrocarbon Condensates From The Process Skid Mounted, Self Contained, Fully Tested Systems.
• Simple Installation And Operation. Easy To Transport.
• Cold Weather Packages Available.
• Integrated Compressor Packages Available.

BTEX System Sizing Guide:

• 125,000 BTU/HR Regenerator = SYSTEM 1
• 375,000 BTU/HR Regenerator = SYSTEM 2
• 500,000 BTU/HR Regenerator = SYSTEM 3
• 500,000 BTU/HR Regenerator = SYSTEM 3F
• 750,000 BTU/HR Regenerator = SYSTEM  4
• 750,000 BTU/HR Regenerator = SYSTEM  4F
• 1,500,000 BTU/HR Regenerator = SYSTEM 5F
• 2,000,000 BTU/HR Regenerator = SYSTEM 6F
• 3,000,000 BTU/HR Regenerator = SYSTEM 7F

• F – Forced – Draft Fan Cooled
• C – Cold ambient freeze protection is available as an option on any size unit
• A – Automatic discharge bypass with manual reset
• X – Integrated COMPRESSOR OPTION is available for all forced-draft units
• P – Substitute blow case with electric pump for condensate removal
• B – Black Gold Rush combustor integrated on skid package
• T- ACL combustion high efficiency burner with Auxiliary BTEX burner
• CUSTOM SYSTEMS  can be designed for any requirement.

All of Scorpions fabricated systems are engineered and meticulously fabricated to our customer’s specific requirements, fully tested at our facility and shipped ready to go to work for you.