Ambient BTEX Systems

Air-cooled condensers with natural draft cooling are one of the most common options because of the relatively simple design and competitive capital cost.
And, they can be used on locations where no electrical power is available.However, because of thermodynamic limitations, the condenser’s  operating temperature will be higher than the ambient dry-bulb air temperature. For most practical natural draft heat-exchanger designs, the condenser temperature is about 20°-30° F. approach to ambient temperature.

  • Only for sites with no electrical power.
  • Scorpion blow case.
  • Fully assembled and tested.
  • All stainless steel TiG welded condensers and piping.

scorpion ambient btex

BTEX System Sizing Guide:

  • 125,000 BTU/HR Regenerator = SYSTEM 1
  • 375,000 BTU/HR Regenerator = SYSTEM 2
  • 500,000 BTU/HR Regenerator = SYSTEM 3
  • 500,000 BTU/HR Regenerator = SYSTEM 3F
  • 750,000 BTU/HR Regenerator = SYSTEM  4
  • 750,000 BTU/HR Regenerator = SYSTEM  4F
  • 1,500,000 BTU/HR Regenerator = SYSTEM 5F
  • 2,000,000 BTU/HR Regenerator = SYSTEM 6F
  • 3,000,000 BTU /HR Regenerator = SYSTEM 7F
  • F – Forced – Draft Fan Cooled
  • C – Cold ambient freeze protection is available as an option on any size unit
  • A – Automatic discharge bypass with manual reset
  • X – Integrated COMPRESSOR OPTION is available for all forced-draft units
  • P – Substitute blow case with electric pump for condensate removal
  • B – Black Gold Rush combustor integrated on skid package
  • T- ACL combustion high efficiency burner with Auxiliary BTEX burner
  • CUSTOM SYSTEMS  can be designed for any requirement.

All of Scorpions fabricated systems are engineered and meticulously fabricated to our customer’s specific requirements, fully tested at our facility and shipped ready to go to work for you.